Engagement
The sharp outer teeth of the plug cutter tool slice cleanly into the face of a scrap piece of wood.

A plug cutter drill bit is a hollow cutting tool essential for high-end cabinetry and carpentry. Instead of turning wood into chips as standard CNC drill bits do, a wood plug cutter from Bauron slices a circular path into the wood, leaving a solid cylinder intact in the center.
The sharp outer teeth of the plug cutter tool slice cleanly into the face of a scrap piece of wood.
As it plunges, it clears material around the perimeter while leaving the core intact.
A screwdriver or chisel is used to easily snap the newly formed plug out of the board.
The matching wood plug is glued into a counterbored hole to hide the fastener, creating an invisible, flush finish.

Wood plug drill bits let plugs be cut from the same scrap wood as the workpiece for seamless concealment.
Tapered plug cutter bits create a wedged plug that fits tightly without visible glue lines.
Shears wood fibers cleanly to prevent tear-out on the face of the plug.
Ejects sawdust quickly to prevent burning in hardwood plug-cutting applications.
Machined to decimal tolerances that match standard counterbore and Forstner drill bit sizes.
| Specification | Range / Details |
|---|---|
| Diameter Range | 1/4" to 1" (Matches standard fastener recesses) |
| Plug Style | Straight Cylinder or Tapered (for tight friction fits) |
| Cutter Geometry | Multi-tooth (4 or more cutting edges) |
| Shank Type | Round, Reduced Round, or Hex Shank |
| Material | High-Carbon Steel or HSS |
| Format | Individual cutters or comprehensive sets |
| Material / Coating | Best For | Key Advantage |
|---|---|---|
| High-Carbon Steel | Softwoods like pine, cedar, and fir. | Sharpens easily and is economical for general carpentry. |
| HSS (High-Speed Steel) | Oak, maple, walnut, and exotic woods. | Retains a sharp edge longer under the high friction of hardwood plug cutting. |
| Carbide-Tipped | High-volume work and highly abrasive materials. | Provides wear resistance for continuous industrial plug manufacturing. |
High-carbon steel is economical and easy to sharpen for softwoods, HSS retains its edge longer in hardwoods, and carbide-tipped cutters provide wear resistance in abrasive, high-volume work. Our CNC drills design guide lists plug cutters among the wood drill types.
Provide vertical stability that helps prevent the plug from snapping prematurely and are the preferred machine for this tool.
Can be used carefully with a portable drill guide for on-site wood plug cutting.
Used in automated router centers to produce large quantities of dowels or custom plugs for the woodworking industry.

Hides assembly screws by matching the exact wood grain using a plug cutter tool, while spur point drill bits drill clean pilot holes for the screws.
Conceals heavy decking fasteners from the elements to prevent rust and maintain a clean wooden surface.
Plugs counterbored holes in floorboards with dedicated plug cutters: hardwood plugs cut from matching offcuts blend into the surrounding boards.
Covers stainless steel marine screws with teak or mahogany plugs for a watertight, finished surface.
A straight cutter produces a uniform cylinder for general use. A tapered plug cutter drill bit creates a plug that is slightly wider at the top than the bottom, allowing it to wedge tightly into the hole and eliminate visible glue lines around the rim.
It is possible, but unlike auger drill bits, a plug cutter has no center pilot point, which can cause the tool to walk when starting. Use a portable drill guide to keep the tool vertical when operating it in a hand drill.
Burning is caused by friction, commonly from excessive drill press speed, dull cutting edges, or sawdust left in the circular groove. Reduce the speed, sharpen the cutter, and lift it regularly to clear sawdust.
For dense woods such as oak, maple, or cherry, use HSS plug cutters. Carbon steel bits can overheat and dull more quickly in tight-grained hardwoods, resulting in scorched plugs.
Do not drill through the board. Drill about 1/2 to 3/4 inch deep, remove the board from the drill press, then insert a flathead screwdriver or small chisel into the groove and gently pry until the plug snaps at its base.
Bauron provides design and engineering support for application-specific tooling requirements. Share the geometry, material, coating needs, and machining challenge for technical review.
Talk to Engineering